Convert HP Ultrium LVD Drive to HVD by using MH19 SCSI converter

Convert LVD Interface on Ultrium Tape Drive to HVD
Does not consume a SCSI ID
Requires only 5 VDC Power

Boardlevel version: Paralans' Model MH19 LVD to HVD Converter lets you add the Hewlett Packard Ultrium Drive to an existing High Voltage Differential (HVD) SCSI bus, accomplished without any impact on SCSI protocol or loss of HVD data thruput

Click on photo for enlargement.
For complete dimensions see outline drawing.

Paralan's Models MH19 LVD to HVD SCSI Converter lets you add the HP Ultrium Drive to an existing High Voltage Differential (HVD) SCSI bus. This is accomplished without any impact on SCSI protocol or loss of HVD data thruput. Click on photo for installation instructions.

Installation Instructions

Paralan's Model MH19 LVD to HVD Converter lets you add the Hewlett Packard Ultrium Drive to an existing High Voltage Differential (HVD) SCSI bus. This is accomplished without any impact on SCSI protocol or loss of HVD data thruput.

LVD cannot directly communicate with HVD SCSI. A 80 Model MH19 Converter enables this type of communication by converting the LVD SCSI to HVD. The presence of a SCSI Converter will not decrease HVD data thruput.

Paralan SCSI Converters and SCSI Expanders are completely compatible with devices that conform to the ANSI X3T10 standard.

PDF version of this data sheet.

Environmental

Relative Humidity:
0 - 95% non-condensing
Operating Temperature:
0 - 50°C
Storage Temperature:
–25 to +75°C

Power Requirements

Voltage:
5 V dc ±5%
Current:
Typical: 0.75 A
Max: 0.8 A
Note: If the Converter must power
external HVD terminators,
add up to 1 A additional

Safety Approvals

UL, CSA, TUV, CE

EMI/RFI

FCC Class A, CE

Termination

LVD: Multimode Terminator
HVD: No Terminator

Communication

Parallel Transmission
Rate (sustained): 40 MBytes/sec
(16-bit)

Warranty

Two year limited warranty

Weight

2.5 oz (71 g)
Shipping weight,
approx. 1 lb (0.5 kg)

Physical Size

Height: 2.7 in. (69 mm)
Width: 5.3 in. (134 mm)